Dog Paw Print Necklace No AMS (2 Versions)

📝 Description

Always carry the memory of your best friend with you! 🐾

This is a minimalist and super clean dog paw print necklace design. It's a very easy and quick to print, lightweight model with an ideal size (2 cm high, only 2 filament grains) for daily wear. It is specially designed for those looking for a meaningful piece without technical complications.

The file includes 2 versions:

• Version 1 (Multi-color per layer): Ideal for combining two tones.
• Version 2 (Silhouette): Hollow minimalist style that highlights the design. It looks incredible in gold filament!

🛠️ Recommended Print Settings

To achieve a perfect finish without failures, follow these settings:

• Supports: Not needed (prints flat on the bed).
• Nozzle: 0.4 mm.
• Layer height: 0.22 mm. - (0.16 mm for more details)
• Infill: 10% (any pattern you prefer).
  ⚠
• Speed: Low. Avoid high speeds to ensure details.
• First layer: Print slow and ensure excellent bed adhesion to prevent it from peeling off.

🎨 Color Change Guide (No AMS)

Version 1 is designed to be printed on any single-color machine by performing a manual pause:

1. Total thickness: 3 mm (2 mm for the base and 1 mm for the paw print relief).
2. Suggested colors: White for the base and Black for the paw prints (you can use any colors you like).
3. Pause: Configure a pause in your slicer just before starting the relief (at a standard layer height, it's usually around layer 12, but always check your slicer before sending to print).