ESP32 + LM2596 Box
Print Profile(1)
Description
Commercial use of this 3D model, including the sale of physical prints or digital files, is strictly prohibited. This object and its derivative works may not be sold, rented, sublicensed, or used for monetary compensation. Copying, remixing, or re-uploading the files to other digital platforms without express written permission is a violation of copyright law.
I've made the box for ESP32 + LM2596 modules. Main plan was to use it as a display technology box, that measures tyre pressure. Inside the project, there should be 2 files inside. 1 File of a BOX, 1 File of improved pins, that you can glue it anywhere inside the box yourself, so you won't need screws, just mount the modules on the pin plates, and you're good to go.
---
properPins.3mf
Width-60.63mm
Depth-55.23mm
Height-9.09mm
screenBox.3mf
Width-85.50mm
Depth-126.31mm
Height-47.20mm
---
Stuff that was used in this project: tft led 2.42 inch display, LM2596 DC-DC HW-411 module, ESP32 module, CLAI66 wires, 1x 5mm LED, 3x 12x12mm button with a plastic cover.
Be informed: This box display top lid is ONLY COMPATIBLE WITH 2.42 INCH DISPLAYS.
Display area of the screen: 57mm x 29.5mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)