Dagan Gera's lightsaber
Print Profile(1)
Description
This is a digital 3D printed model of Dagan Gera's lightsaber from Jedi: Survivor.
The download file contains a 3D model that can be 3D printed on a 200mm build plate.
The original model link is here https://makerworld.com/zh/models/573941-dagan-gera-s-lightsaber. Thanks to the original author for sharing. If this is an infringement, I will remove this work.
I enlarged it based on the original author's model and added two detachable screws, simplifying the original inner core model. If you need a more detailed model, you can download the original.
It is recommended to use PLA Silk filament for the gold and silver parts to achieve a metallic texture.
Although the upper part has screw threads for fixation, it is recommended to permanently glue it. Only the handle section where the screw is installed should not be glued.
The model is relatively simple, so no instructions are provided. After printing all parts, you can easily assemble them by referring to the pictures.
The required hardware is as follows
A 5mm screw and nut are required. The screw length should be at least 45mm or longer.
But if you like this model, go ahead and print it!
If possible, please give it a boost!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)