Spider-Man - The Web Slinger | Multipart no AMS

Spider-Man - The Web Slinger

Dynamic and powerful web-slinging Spider-Man captured in an iconic action pose, shooting thick, detailed web beams from both hands that impact the ground with impressive splashes. This fully multipart model features easy snap-fit assembly with no glue required.

Part of my Legends Unleashed series, this model brings the classic web-slinger to life with high-detail sculpting optimized for Bambu Studio. The thick web beams and ground impact splashes add real visual drama and make it stand out on any shelf or display.

Print profile

• 100% scale = 189 mm × 150 mm × 232 mm
• Layer Height: 0.16-0.2 mm
• Walls: 2–3
• Infill: 5–30% (uses lower end for large parts to save filament/time; higher end for small/functional parts and connectors to boost durability and prevent breakage during repeated assembly/disassembly)
• Speed: Small parts operate at a slower speed than other parts.
• Supports: Tree supports are automatically generated
• Color Handling: Multipart design → no AMS required. Print plates separately in desired filaments. You can also rearrange the parts onto different plates if you want to mix the colors in a more unique way.

Plates

Assembly instruction

This multipart model is designed for effortless, glueless assembly! Snap everything together using the peg connectors. No glue required for a secure, satisfying fit.

• Preparation Carefully remove tree supports before assembly. Tree supports release most cleanly when cut between branches… snap them away without stressing surfaces.

• Peg Connections Almost all parts use the same snap-fit peg system
  • Pegs are intentionally tight for rock-solid hold → align and then push firmly until you feel/hear the snap.

  • If too tight → lightly trim peg domes (green) with a knife.

    

  • If slightly loose → a tiny drop of superglue fixes it instantly.
  • Smaller pegs may feel less "clicky" than larger ones but still provide reliable strength.
• Orientation Note: Left (L) and Right (R) are labeled based on the character’s own perspective, not the viewer’s. For example, the character’s right eye is marked as R, even if it appears on the left side when viewed from the front.

Key Printing Tips:

• Disable “Strength → Detect Thin Wall” → gives smoother, cleaner surfaces on detailed parts.
• Always check the slicing preview in Bambu Studio before starting the print.
• Support removal trick: Cut supports into small chunks first, then gently loosen → they usually pop off cleanly without damage.
• Some plates use lots of supports, if so → for reliable prints use these filament settings:
  • Filament Overrides
    • Z Hop When Retract: 0.6 mm
    • Z Hop Type: Spiral
    • Travel Distance Threshold: 1 mm
    • ✅ Enable Retract When Changing Layer
  • Also, disable these settings in Bambu Studio if Variable Layer height is used:
    • Supports
      • ❌ Disable Independent Support Layer Height
    • Others
      • ❌ Disable Reduce Infill Retraction
    • I’ve found that a 0.15 mm top Z distance works best when printing with variable layer height.

Happy printing! Can't wait to see photos of your prints! If you're scaling, experimenting or encounter any issues, let me know → your input helps the next iteration. Please share your feedback for any rating below ⭐⭐⭐⭐⭐ so we can work on improving, thank you!