BIQU CryoGrip Pro Glacier ArUco Marker ⧸ H2C
Print Profile(3)
Bill of Materials
- 3M 9080 Double Sided LED Tape x 1: 8 mm width, 0.15 mm thick
Description
Successful detection. Every time. No compromises.
This Model works only on the H2C. The H2D and H2S use other ArUco Codes!
 This model is part of my ongoing BIQU Build Plate Accessories collection. Each model is conceived, printed, and endurance-tested on my own machines, refined through dozens of iterations to match the printer’s true mechanical behavior. Precision isn't assumed here, it’s verified layer by layer.
Follow me if you like my work, that kind of appreciation really dries my filament. Likes and boosts feed the Maker World algorithm and keep the new models coming |
Tested Compatibility, Fitting And Detection Checked
BIQU Pyrogrip Build Plate for Bambu Lab H2C (330mm*320mm)
Blue BIQU CryoGrip Pro Glacier Build Plate for Bambu Lab H2C (330mm*320mm)
Mechanically Incompatible (No Honeycomp Handle)
Matte Orange and Blue BIQU CryoGrip Pro FrostBite Build Plate for Bambu Lab H2C (330mm*320mm)
Matte Orange and Blue BIQU CryoGrip Pro FrostBite Build Plate for Bambu Lab H2D/H2S (350mm*325mm)
ArUco Incompatible (Use Other Model, See Collection)
BIQU Pyrogrip Build Plate for Bambu Lab H2D/H2S (350mm*325mm)
Blue BIQU CryoGrip Pro Glacier Build Plate for Bambu Lab H2D/H2S (350mm*325mm)
The BIQU CryoGrip Pro Glacier is an outstanding build plate for ASA, but there is one annoying drawback: the printer cannot reliably detect it, and the supplied adhesive ArUco stickers are, frankly, a joke.
This model puts an end to that.
Three print profiles.
“Engineering Plate” as suggested by BIQU.
“Cool Plate Super Tack” as requested by the community.
“Textured PEI Plate” because why not.
Developed specifically for the BIQU CryoGrip Pro Glacier on the Bambu Lab H2C, it provides a precisely aligned ArUco marker that delivers reliable build plate recognition every time.
The integrated clips engage directly with the plate's honeycomb pattern, ensuring perfect alignment and a secure mechanical fit. For additional retention, a small strip of 3M 9080 LED tape can be applied underneath the mount.
The design has been tested in both PETG and ASA.
For science, I even printed the ArUco marker itself in PLA and used it on an ASA print with a chamber temperature of 65 °C. Surprisingly, it held up for several weeks. PETG is an excellent long term choice, while ASA is the ultimate install it once and forget about it solution.
No more failed recognition. No more crooked stickers. Just perfect alignment and reliable detection, every single time.
Boost Me (for free)
Support for this model helps fund 3D printing in a local school in Lower Saxony, Germany. Contributions go toward printers and filament for student maker and robotics clubs, including preparation for "Jugend forscht" competitions. Likes, follows, and boosts help increase visibility and indirectly support hands-on technical education.
Translation Notice: I am not a native English speaker. I write all descriptions in English to ensure the best automated translation into other languages. To make the text smoother and more readable, I use language tools to refine my wording.
Bill of Materials Notice: Hero Shot models are usually printed in Bambu Lab PLA Basic, primarily Pumpkin Orange, Purple and Matte Charcoal Black. The Bill of Materials contains the recommended filament for the model, which may differ from the filament used for the photos.
Purchases made via the BOM support my work through the Maker World Commission Incentive at no extra cost to you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (14)