Mahindra Xev 9e Car / Suv

This model has been optimized for the Bambu Lab P1S using a 0.4 mm nozzle and is designed to print reliably in ABS. For the best balance of strength, surface quality, and print time, use a 0.20 mm layer height, 3 wall loops, 15% Gyroid infill, 5 top layers, and 4 bottom layers. Print with a 260°C nozzle and a 100°C heated bed while keeping the printer fully enclosed. Use an 8–10 mm brim to improve bed adhesion and reduce the risk of warping. If your slicer generates supports, enable Tree Supports (Auto) with a 50° overhang threshold. Keep part cooling low (0–20%) for optimal layer bonding in ABS. These settings have been selected to produce a strong, durable, and clean-looking print suitable for both display and wearable purposes.