Dinette Drawers Weinsberg 600 MQH
Print Profile(2)
Bill of Materials
- Magnetklebepads x 1: siehe Link in der Beschreibung
- 3mm Klebefilz x 1: siehe Link in der Beschreibung
Description
Hello. I created all the files according to the measurements I took on my vehicle (either Ford Nugget, or Weinsberg MQH). Please check before printing if the measurements match those of your vehicle. Often only a little scaling is necessary, then it will fit. Thank you very much!
I designed and printed these drawers for the two open compartments in the Weinsberg Carabus 600 MQH (MY2026). They fit exactly and are held by metal plates, flush-mounted in the back wall of the drawer, to a magnetic strip which is then glued to the back wall of the compartment.
The handles are designed so that a 3mm thick felt can still be glued to the fronts. Without felt, the handles must be scaled accordingly.
Please be sure to measure before printing; in my case, the two compartments are exactly 566mm wide and 17mm deep.
I used Bambulab PETG HF and the following parts:
Adhesive felt for the fronts: https://amzn.to/3RIrrCp
Magnetic strip with metal plates: https://amzn.to/4hoVNnK
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)