Bicycle Number Plate/Owner Tag | Road Bike Seatpost Decorative Plate | Spain World Cup Bike Tag

This is a 3D Printed number plate that mounts on the bicycle seatpost, which can also be used as a bike owner tag, cycling identification tag, or bicycle decoration plate

The plate features a red and gold Spanish World Cup two-star champion design, with a finished width of approximately 70 mm. Its size will not excessively obstruct the frame, making it suitable for road bikes, mountain bikes, commuter bikes, and other bicycles with corresponding seatpost mounting space

Model Includes

• Left-side mounting direction plate
• Right-side mounting direction plate
• Red and gold two-color print configuration
• Pre-arranged 3MF file

The left and right versions can be chosen based on the bicycle's drivetrain side, shooting direction, and frame space. They can be assembled with glue by yourself

Printing Reference

• Recommended materials: PLA, PLA+ or PETG
• Recommended nozzle: 0.2 mm
• Color scheme: Red main body + gold or yellow pattern
• Filament changes: 1 time
• Current slicing reference filament: approximately 16.6 g

Actual printing time and filament consumption will vary depending on the printer, layer height, infill, and speed settings. The uploaded 3MF has a basic two-color configuration and can be directly inspected and sliced in Bambu Studio

Installation Instructions

1. Print the plate body and the mounting part for the corresponding direction
2. Install the mounting part in the appropriate position on the bicycle seatpost
3. Use matching screws and nuts to connect the plate body and the mounting part
4. Adjust the plate angle to ensure it does not touch the rear wheel, frame, brake cables, or rider's legs
5. Check if the screws and mounting part are secure before the first ride

Dimensions and Compatibility

• Plate width: approximately 70 mm
• Mounting screw specifications: M5, M6 (maximum)

The seatpost diameter and space may vary for different bicycles, please measure your seatpost size before printing. When adjusting the fit range, it is recommended to only modify the mounting part, do not scale the entire plate, otherwise the screw holes and pattern details will also change

Spanish-themed bicycle seatpost number plate and bike owner tag. The plate is approximately 70 mm wide. Left-side and right-side mounting versions are included, together with the seatpost mounting part and a two-color 3MF print configuration.

Please measure your bicycle seatpost before printing and make sure the plate does not interfere with the rear wheel, cables, frame, or rider