Compact Universal Airbrush Holder - Makerworld Exclusive - Free 3D Print Model

Search models, users, collections, and posts

jayburd

Art>Other Art Models

IP Report

Print Profile(10)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.2 h

1 plate

4.9(10)

0.2mm layer, 2 walls, 15% infill

Designer

45 min

1 plate

5.0(8)

0.2mm layer, 2 walls, 15% infill

Designer

1.6 h

1 plate

4.8(4)

0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.7(3)

Click to see more

Open in Bambu Studio

Boost

198

530

247

Released

Description

Universal airbrush holder. Modelled after the airbrush holder on Iwata compressor.

Print with support, see attached photo for example which used slim tree support.

There are 3 mounting options

screws - use the provided screw holes to mount the holder
magnet - use the “6x3 magnet” version, requires 6mmx3mm rare earth magnets, for example https://www.amazon.com/gp/product/B096LZNZTQ. magnets can be press fitted into the cavities, no glue required
VHB tape - suitable for smooth surface such as plastic. use the “no magnet” version. https://www.amazon.com/Double-Mounting-Strong-Adhesive-Office/dp/B0CCYD42N9/ base is slightly over an inch in depth, any VHB tape 1 inch wide or less should work

There are five versions provided

single
double
triple
quadruple
quintuple

Fit:

main airbrush diameter up to 12.8mm can be accommodated
bottom opening: up to 9mm in diameter
top opening: up to 12.6mm in diameter

Most of my airbrushes are various models of Iwata and they all appear to fit fine. If yours does not fit please leave a comment with measurements and I'll make an effort to accommodate.