Mushroom Power Up - Super Mario Bros.

Driven by the desire to turn dreams into reality. 

Mushroom Power Up Super Mario Bros.

With this STL file, you can print the mushroom in any color you like. 

For example: red for Super Mushroom, green for 1-Up, gold for Coin Mushroom, and blue for Mini Mushroom

Easy to assemble:
The mushroom and head arrows should be pointing towards each other. The same must be done for the eyes.

Glue the sparkles to the eyes and the eyes to the head piece (it is not necessary to glue the mushroom to the head)

Attention:

• The version of the head to serve as a container for objects is available in Rock, Proppeler and Spring versions. Check-out in my Cults Profile.
• Filaments can behave differently at different speeds and fills and it is important to check this before printing. The original profile I shared with the design is for reference only. It is important that you configure the temperature, speed, filling and Flow calibration of your filament.

Scale
If you want to print the mini mushroom use the maximum **70% scale of the files.** - in this case, for the eye sparkles, use a scrap piece of white filament to press into the black eye pieces with as a small amount of glue. Trim the excess filament off with your cutters. (last image in gallery).

Infill
Head - 20%
Mushroom and eyes - 10%

Resolution: 0.16mm

Supports: Mushroom (optional - for best results)

Scale: 100% to 70% - (It is important to ensure the fit of all parts)

---

Don't forget to tag us in your posts as @rico3dmaker showing your best printing!