Summary

Edited the Main Body to include a hole to make it easier to mount to the X carriage. made all the M3 holes a tad bit smaller since they were all a little too loose for me. I also increased the thickness at the top on the wire restraint since it didnt allow for a tight enough hold when zip tied and made the top 5015 hole larger for a proper m4 bolt. I added a version for a noctua fan with the wire channel moved to the bottom.

Edited the standard EZABLE mount to move it a bit closer to the nozzle since there was room. offset should now be -41 x and -10 Y.

Included a honeycomb fan cover with screw holes

Update: added a clamp file as I found that was a little loose on my ender 3, so I norrowed the groove by .25 mm

Print Settings

Printer:

Elegoo Mars

                                            Rafts:                      
No

Supports:

Yes

                                            Resolution:                      
.05

Filament:

Siraya resin Siraya Sculpt with With Some Elegoo Black mixed in for color and 15% tenacious for strength

                charcoal gray                    
                        Notes:                     
I printed the main body and EZABL mount on my elegoo mars so I didnt have to worry about any issues with heat warping the parts.  Fan Grill was printed With Atomic Filament Gun Metal Gray.