Search models, users, collections, and posts
Ender 3 v2 feet risers (22mm)
IP Report
Print Profile(1)
TPU 0.24mm layer, 2 walls, 15% infill 15mm tall qty 4
3 h
1 plate
Open in Bambu Studio
Boost
23
26
0
0
65
11
Released
Description
22mm risers for stock rubber feet on Ender 3 v2.
Required hardware:
- 14 - M5 x 8mm screws
- 14 - M5 t-nuts
Very small portion of back feet requires supports (touching buildplate only)
Recommended filament type: PLA, if printer is inside enclosure - PETG, ABS or something similar with higher temperature resistance.
Print 2 x front_foot.stl (front feet are identical).
1 of each back_foot_right.stl and back_foot_left.stl.
You will have to remove 1 screw on each side from PSU tray closest to the back.
In case you want to modify this design, Fusion 360 file is attached.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (0)