screwed poop chute
Print Profile(3)
Bill of Materials
Description
Boost Me (for free)
Support me by boosting the model. Thanks a lot!
The chute is designed to redirect the poops into any bucket placed alongside the printer or over the edge of the desk into a floor bucket. I did not integrate a bucket because normally something which can be used as one is found in any household. This is just to print / waste not more material than really needed.
The width of the chute is adapted to the width of the poop ejection cut-out on the back of the printer. In contrast to many other chutes there is a radius guiding the poop around the corner to the side.
I used screws to attach the chute to the printer. There are different advantages of screwing it to the printer:
- In the back of the printer there are already holes right next to the cut-out
- The screwed chute will never fall off or be moved to another position by any effects during printing or moving your printer
- It is easy remove the chute if you need to without any risk to break it
I mounted the chute with two M3x8 cylinder screws. Others users also just took longer screws leftover from the unboxing. I just added both type of screws feasible (choose one type) and the washers to the bill of materials.
I recommend to use washers to reduce the danger of breaking the chute. In Version 2 the diameter of the holes in the chute are reduced to make screwing easier.
Does not fit on an X1C with AMS Hub
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (309)