Remix V-Spooler 3kg spool Extension +30mm
Print Profile(4)
Description
In the image, a Polymaker 3kg spool is used.
I couldn't fit Polymaker's 3kg paper spool, so I made a bracket to expand it by 3cm.
Attach it to the Left_Arch_Top side.
Along with the expansion, the brace and rollers have also been extended.
In addition to the original parts, you will need M3 inserts and 4 sets of M3x12mm screws.
If you use this expansion adapter, it will be expanded by 3cm, making it approximately 126mm wide.
A spool with a height of 110mm can be inserted.
PLA, 3 walls, 15% is strong enough.
https://makerworld.com/en/models/98832?from=search#profileId-105442
The performance of the original model is good, so it is very stable.
24/04/06
Due to requests, we have added a model with a pilot hole of 3.9mm.
24/12/28
Now compatible with Ver1.0.
Uses the same parts except for the front bracket.
The purple parts in the image are for Ver1.0.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (40)