Print Profile(4)
Description
Membership
I now offer a paid subscription through Makerworld should anyone wish to support my designs or sell prints. All support is greatly appreciated :)
Hellraiser box of lament movie prop.
The box measures 55mm on each side (about 2.16 ") the same size as a standard rubics cube. There's also now an upscaled by 150% version, this needs to print on 2 plates. Many thanks to Nick C for the suggestion and for doing the test print.
There are 2 print profiles of this model, one without a pause, one with a pause to add 1X 8mm diameter by 10mm deep magnet. There is space for 2 magnets but please only add one as the weight of the second magnet can make it a tad heavy to stick properly.
The model is made so it clicks together this can mean when it's a fresh print it can feel a little stiff at first.
I do recomend using a little ca glue when assembing the four side faces, the panels do clip on but the glue will hold it together much better. It's a good ides the lay the faces out one at a time and checking the orientation before gluing.
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (189)