Brick Flower #3742 + Stem #3741 Low-Poly Version
Print Profile(4)
Description
Welcome, If you enjoyed my model, please consider supporting me with a boost 🚀, sharing your make or leaving a like. For information, filament tests, and much more, all about 3D printing, feel free to check out my homepage or join my Filament Deal Channel. Check out my models :) |
Upscaled version of Elements 3741 and 3742. Its designed to be roughly 15cm high.
Its a fixed low polygon version ready to print. The Model is generated from the LDraw data files (3741a and 3742)
The flower stem can be printed with default support without any problems.
The flowers scan be printed all with the same color, or in 3 different colors with the AMS.
When you use the AMS version, the print sequence is set to “Print-by-object”. so you don`t waste material and time changing the spool and can print them in on go.
The flowers are scaled 101% so they fit nice an can be changed easy. If needed just adjust the scale in all directions ~100% is press-fit and 102% is loose.
Colors
For the Stem I recommend Bambulabs PLA Basic Green. Its almost perfect!
For the flowers you can go with the classic colors like Red, Yellow, White, and Blue or use anyone you like 😉.
Print-Settings
Material: PLA, PETG,… (as you wish)
Layer hight: 0.2mm will do the job.
Inflill: 10-20% is enough. If you want it to be a bit heavy go for 100%
Support: yes, standard but only for the stem
Share your makes and support me
Boost Me (for free)
If you like my work, give it a 🚀 boost 🚀. I appreciate your support!
You can support me here, via Ko-Fi or Patreon. Please leave a comment or share your makes 😁.
Membership
You can also support me with a Makerworld Membership
License
Comment & Rating (6)