Ducati Panigale V4R Toilet Paper Holder

If you enjoyed this model, remember to like, follow, and support my work with a nice 

If you're interested in using my models, several membership plans are available, even if you just want to buy me a coffee to show appreciation for my work :D

If you have any requests, don't hesitate to ask in the comments or personal messages!

For anything, don't hesitate to contact me; every request will be fulfilled promptly!

A ready-to-print toilet paper holder inspired by the wonderfull Ducati Panigale V4R!

A must-have gadget for bikers and bike lovers! The best companion never leave you in the moment of need!

The model in the photos has been printed in 0.28 draft settings but the results was still amazing. The model is composed by several parts that can be printed separatedly and GLUED toghether, like the windscreen and the mirrors. The paper holder can be easely assembled with the black pins that can be printed. On the back you can find 4 holes for screw to hang it to the wall.

The only part that requires AMS is the light module in black and white, however you can always print it in black and paint on it.

Leave a like if you enjoy this module and help me in the bath contest! :D

Every model is PIP; the wheels are actually working.

I used AMS to achieve optimal multicolor results.

The model requires no assembly; you just need to carefully remove the tree supports already set in the print profile.

Better results can be achieved using the 0.2 mm printhead, at the expense of increased print times.

It's recommended NOT to change the print profile settings to avoid having problems with the final result.

I invite you to use tweezers and small pliers to remove the supports.

In more recent models, I've used smaller tolerances for the wheel alignment, to ensure a higher level of detail and fewer supports to remove in that area.

For this reason, it's necessary to "break in" the car once the supports have been removed (trying a couple of times) :D