Magic water tap
Print Profile(4)
Description
Magic Water tap
for Makerworld
Membership
Do you want to sell my designs or want to buy me a coffee ☕️? Please consider one of my subscription tiers. Thanks, Creatività in 3D
Magic tap, created and adapted for Makerworld and Bambulab.
Print profiles are divided by object or all parts together.
The profile with 3 plates requires, for those who want to print the tube, changing the settings in "vase mode" for plate 3.
If you download one print profile at a time, the settings are already correct.
For those who want to color the tray with the Makerworld logo, the printing time is approximately 13 hours, while those who use a single color for the tray, the printing time is reduced to approximately 4 hours.
Required add-ons:
-5v immersion pump: https://amzn.eu/d/2D3mdmc
-usb cable: https://amzn.eu/d/c17g8PT
Assembly:
Insert the tube (previously printed in transparent PETG or if you have one with an external diameter of 8mm and an internal diameter of 7mm it is fine) into the tray, no glue is needed, it fits perfectly
Insert the pump into the printed hole and glue it with hot glue or superglue to the bracket as in the photo
Insert the pump cable into the appropriate hole and secure the hole with hot glue or gel glue to prevent water from flowing out. Then solder the USB cable
Remove the supports from the tap and with cutters, remove the burrs of the supports fixed to the model
Glue the flow regulator to the tube with hot glue or superglue
ENJOY!
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (32)