Search models, users, collections, and posts
Heat insert press
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 25% infill
Designer
3.5 h
2 plates
Open in Bambu Studio
Boost
110
166
8
9
167
47
Released
Description
A heat insert press helps place them more precisely and cleanly.
You can use the linear guide or the 2020 profile of the size you think is convenient or have at home, you just have to be careful that the profile has to be, at least, 55mm longer than the guide
Bill of materials:
| Linear rail | 1 | 230 length in my case |
| Mgn12C block | 1 | |
| M3x8 screws | 13 | 15 if you want to put 2 springs |
| Washer | 2 | 4 if you want to put 2 springs |
| M3 t-nut | 7 | |
| Spring | 1 | or 2 if you want put 2. 7,14mm diameter and 50,8mm in my case |
| 2020 profile | 1 | 330mm lenght in my case |
| Heat insert | 2 | 4 if you want to put 2 springs |
| Zip tie | 1 | |
| M10 washer | 1 |
Optional for cable winder:
| M3x8 screws | 2 |
| M3 T-nuts | 2 |
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)