Tufting Gun Gear Guard - Free 3D Print Model

Search models, users, collections, and posts

Stebe

Hobby & DIY>Other Hobby & DIY

IP Report

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

PLA Only, 0.16mm layer, 99 walls, 15% infill

Designer

1.2 h

1 plate

4.6(5)

PETG Support Interface, 0.16mm layer, 99 walls, 15% infill

Designer

4.7 h

1 plate

A1 Mini PLA Only 0.16mm layer, 99 walls, 15% infill

Designer

1.6 h

1 plate

A1 Mini PETG Interfacing 0.16mm layer, 99 walls, 15% infill

Designer

4.5 h

1 plate

Open in Bambu Studio

Boost

111

195

128

Released

Description

Note: The included profile uses PETG support interface. Make sure your flushing volumes are set to at least 800 if you are going to use the PETG supports method. The flushing volumes will automatically change when you change the filaments & colors so make sure to double check before printing.

Update: I have also added a print profile without PETG support interface. The supports still remove easily with some needle nose pliers.

Helps prevent your yarn from getting stuck and is also a great safety measure for your tufting gun! These can be applied to both sides of your gun and should work for most guns of this style. I designed the screw holes so that there is a ton of room for guns with differently spaced screws. Just make sure to align the guards properly so that there is enough space between them and the gear.