Search models, users, collections, and posts
Decorative small signs for the desk and not only
IP Report
Print Profile(4)
0.16mm layer, 2 walls, 10% infill
Designer
22 min
1 plate
0.16mm layer, 2 walls, 10% infill
Designer
10 min
1 plate
0.16mm layer, 2 walls, 10% infill
Designer
23 min
1 plate
0.16mm layer, 2 walls, 10% infill
Designer
22 min
1 plate
Open in Bambu Studio
Boost
5
20
3
0
65
12
Released
Description
Several small signs with some famous sayings in Latin and English provided with their "feet".
The feet is provided in a separate STL file and should be printed with brim.
Sign Dimmesions: 80x35x4mm
Print parameters:
- Layer height - 0.16mm
- Perimeters - 3
- Infill - 10% is sufficient (infill type doesn't matter)
- Brim - NO for the sign, YES for the feet
- Support - NO
- Raft - NO
- Place on face - horizontally on the back face of sign/feet
- Filament type - PLA
Could be printed even in multicolor without AMS, MMU, or similar.
For multicolor print:
When printing at 0.16 layer height: put the printer in Color Change mode(G-code M600) at layer 16 and then change filament
When printing at 0.2 layer height: put the printer in Color Change mode(G-code M600) and then change filament
You can increase dimmesion at will but pay attention if you want to print in multicolor, this will change the layer number when you must put the printer in Color Change mode(G-code M600).
License
This user content is licensed under a
Creative Commons Attribution
Comment & Rating (3)