Universal Carry Handle for 3D printers and tools

============= BREAK NOTICE =========================

Hello 3D printing friends!

Due to work requirements, studies and home renovations we will be little to not active on MakerWorld for the next coming weeks. Should there be remarks / feedback that you would like to share and would love to see implemented in our work or certain models, please send us a DM as those will be much easier to find and read after coming back. General comments etc on models tend to get buried which is unfortunate and is something we would like to avoid as we take your feedback seriously.

We apologize for any inconvenience our absence might cause but rest assured all messages will be addressed upon our return to designing!

Cheers!

====================================================

UPDATED Jan 31st 2025:

Remodeled the handle using standard sizes.

The dimensions between the holes is now 120mm, which makes it easier to use a template on where the handles will go.

Print profile is changed. Object is printed on the side with a small amount of supports for the handle ends.

This results in a smooth feel for the entire handle and a stronger handle due to print orientation.

Simple Carry Handle to use for example on 3D printers with T-slots, workshop tools that require handling or drawers!

The holes allow for M4 screws to be used.

For general sizing please see the attached image.

Updated the print profile so the handle is printed on the side.

This may obviously leave a textured feel on one side depending on the build plate that is used.

Printing the handle upright will remove that issue but then supports are recommended to achieve a more ‘gentle to the touch’ handle.

If you like the model, please consider leaving a like and a rating with pictures of your makes! It is encouraging to see my creations out there.

Also consider leaving feedback regarding the models as it will help improve my overall skills as a beginner 3D designer!

Want to support me with some coffee? :)