Sailboat_3dGAPI

Hi!

This is a simple sailboat that I made using Creo program with a stand that I made for it.

It is meant as a simple decoration or a gift for those who like boats and sailing.

Feel free to ask for help.

File sharing is not allowed.

3D PRINTING SETTINGS:

For print orientation see the uploaded picture.
Original boat size is (15.41 x 45.37 x 55.15) mm.
Post processing is recommended (sandpapering after removing supports + painting) or using different materials for easier removing of supports.
You can scale it up if you want.
Layer height: 0.12 mm
Infill: 15 - 25 %
Supports: YES (Touching Buildplate only)
Build plate adhesion: Brim