Kennen3D

cover

20240414_192303_d2735a04-90a6-414f-81b3-61a4d0ae49bd.jpg

plate_1.png

20240414_194516_545b3d43-4699-4988-a124-b5870bff4829.webp

Tree Slim supports used.Only lost a one finger and had some trouble removing support beind the feet.

Tree Slim Support - 0.08mm layer, 2 walls, 15% infill

thczv

inverted2.jpg

IMG_1895.jpg

IMG_1896.jpg

Nearly inverted, requires very little support (under 8 grams) with no support required for the hands.

Inverted - 0.08mm layer, 4 walls, 8% infill

CrazyAl_

IMG_8684.jpg

IMG_8688.jpg

IMG_8686.jpg

IMG_8694.jpg

IMG_8695.jpg

I printed a ½ scale of the model with good success by orienting it so the supports are on the back. I'm impressed with the detail on the front. The back will need some work, but no one really sees the back. A different support structure or different support material may improve end appearance.&nbsp;

0.08mm layer, 2 walls, 20% infill, Model oriented on back 

MeepleMercantile

tempImagePgoMxz.jpg

tempImageKkV076.jpg

tempImageodqq8v.jpg

tempImagep2IIEV.jpg

tempImageSvZbwl.jpg

tempImageY9pr3w.jpg

tempImagevqaXM0.jpg

tempImage6eYeFY.jpg

tempImage0By1l5.jpg

This is a 10 inch tall version of the Christus. Even with 3 walls, this statue benefits from backlighting as the lithophane effect brings out the details in the face and the folds of the robes. &nbsp;My first attempt with original designers settings did not work for me at this scale. I smoothed out the base so it will have crisp lines. I changed the Tree Supports to Default rather than slim as they needed the extra bulk at this height. Supports on build plate only to prevent the supports from filling in small detail areas around the feet and hem of the robes. Since this has been scaled up, it is not suitable for the A1 or A1 mini.  .08mm Extra Fine @BBL X1C base settingRotated 45 degrees and aligned seam to back3 walls and 15% lightning infill for strength and speedSupport Type: Tree (Auto), Style: Default, Threshold Angle 45, On build plate only checked

165% 250mm tall, 3 walls, 15% Lightning infill, Tree Support

Vuldriel Zastek

IMG_3054.jpg

IMG_3055.jpg

The front details are a lot nicer in this configuration, as well as strength of the model as it is printed along its shortest axis.

Printed on back, Tree supports

Christus Statue

Wanted to try out a Christus statue. This is the second STL I&#39;ve tried and it&#39;s very well done by nykyly on Thingiverse.The only casualty during support removal was the left pinky. To beware of that weak point.&nbsp;If you figure out better print settings, please share!

Print Profile(5)

Description

Comment & Rating (274)

This remix is based on

License

Remixes (4)

Related Models