Bambu Lab A1 Poop Collection Box

Bambu Lab A1 Poop Collection Box, it is recommended to print at a low speed and silence for better results, the platform should be removed within 1-2 minutes after printing is completed, to avoid shrinkage and deformation due to residual heat from the hotbed, because the thickness is relatively thin, it is recommended to print during the day in sunny weather and room temperature above 20 degrees Celsius, to avoid deformation due to temperature difference, currently using PETG materials to print, the effect is good, can be stacked, other materials can be tried. The original model was drawn using UG_NX2306.