Bambu P1/X1 Wire Nozzle Wiper / Nozzle Cleaner

Bambu P1 series wire nozzle wiper, ensures that the nozzle residue is wiped clean! Personally tested for two weeks and it works well. Search for "electric wire brush head" on Taobao to buy a brush head with a diameter of 5mm and a handle diameter of 3mm. Apply some force when installing.

==================================

Regarding the issue of the nozzle staying above the wire brush after printing is complete after updating the version, here is a personal solution: Modify the G-code at the end of the printing to make the hot end move slightly to the left after wiping the head, as shown in the figure below. Add the line "G1 X65 F12000;=====move to safe pos ======" below the second wipe, then save it.