Samsung Galaxy S24 cases - newest v3.6 - Smartphone - Free 3D Print Model

Search models, users, collections, and posts

ThesBer

Hobby & DIY>Electronics

IP Report

Print Profile(6)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

Voronoi case v3.0 1,2 mm - 0.2mm layer, 2 walls, 15% infill

Designer

1.5 h

1 plate

5.0(13)

S24 Voronoi v3.1 in 1.6 mm - 0.2mm layer,2 walls,15% infill

Designer

1.5 h

1 plate

4.9(10)

Organic case v3.6 in 1,6mm - 0.2mm layer,2 walls,15% infill

Designer

1.6 h

1 plate

4.3(6)

Voronoi case v3 thick=2mm - 0.2mm layer, 2 walls, 15% infill

Designer

1.8 h

1 plate

5.0(1)

Click to see more

Open in Bambu Studio

Boost

160

381

208

Released

Description

Content has been automatically translated.

Show original

This is my newest Samsung Galaxy S24 cases - complete redesign with two different pattern Voronoi and Organic.

No support is required in the slicer settings :-)

The green parts in the picture are the supports for easy printing and must be removed after. Removing can be easy or sometimes a little difficult depending on the material and printer.

New version v3.6 and v3.1 (1,6mm) changes:
The Voronoi and Organic pattern is now better arranged around the camera and the light (flash).

Version v3.0 are +33% thinner and 33% thicker:
Three versions are now available in 1.2mm (thin), 1.6mm (normal) and 2.0mm (thick) wall thickness.

I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.

See also Hexagon version 1 --> https://makerworld.com/en/models/229309
and Hexagon version 2 with AI text --> https://makerworld.com/en/models/229311
and Halloween version 1 --> https://makerworld.com/de/models/641265
and Halloween version 2 with .step file --> https://makerworld.com/de/models/1877214

Boost Me (for free)

If you love my work, consider boosting the model as well.

I’d always happy about a „Download”, „Like”, „Make”, or a „⭐⭐⭐⭐⭐” rating!

Happy Printing
Toni :-)

-------------------------------------------------------------------------------------------------------------------------------------------------------------

These are my newest Samsung Galaxy S24 cases – complete redesign with two different patterns: Voronoi and Organic.

no supports is required in the slicer settings :-)

The green parts in the picture serve merely as supports for easy printing and must be removed afterwards. Removal can be easy or sometimes a little difficult depending on the material and printer.

New version v3.6 and v3.1 (1.6mm) changes:
The Voronoi-Organic pattern is now better arranged around the camera and the light (flash).

New +33% thinner and 33% thicker Version v3.0:
Three versions are now available with 1.2mm (thin), 1.6mm (normal), and 2.0mm (thick) wall thickness.

I used filament TPU hardness 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print, the filament should be dry.

See also Hexagon version 1 --> https://makerworld.com/en/models/229309
and Hexagon version 2 with AI text --> https://makerworld.com/en/models/229311

and Halloween version 1 --> https://makerworld.com/de/models/641265
and Halloween version 2 with .step file --> https://makerworld.com/de/models/1877214

Happy Printing
Toni :-)

Category: Mobile Phone