5.8L Rice Bucket Dry Box Mid-axis Dry Box Version, Compatible with Bambu Spool, Can be Placed Horizontally or Vertically dry box

I really like KYZ Design 's designed High Flow Desiccant Holder. The drying effect is excellent, so I combined it with the 5.8L rice bucket.

My desired features:

1: Can be placed vertically or horizontally (the spool will not move around when placed horizontally)

2: Try to print as few accessories as possible, make full use of the mid-axis drying function

3: It has a rewind and return material function. Magnetic suction rewind

4: Can be installed in batches, with a mold ruler for punching, because I bought 10 rice buckets at once, but after printing, it only takes 5-10 minutes to complete the installation of each.

63 diameter is very suitable for Bambu spool, 53 diameter is suitable for K family or Tuozhu original factory spool, etc. Print as needed.

Materials used:

• M3*10 6 pieces
• M3 nuts*6 or m3 hot melt nuts*6
• 608z bearings*2
• Outer diameter 23*wire diameter 3.1 0-type sealing ring (used for sealing the material outlet cover)
• PC4-01 air tube connector *1
• If rewind is needed, the magnet used is 15*3mm, 2 pieces on the spool, 4 pieces embedded in the handle

The shaft seat of the box is best made of petg material, others are not limited.

Known disadvantages:

1: The spool is too smooth, magnets can be used to attract each other to increase friction

2: The central pillar connecting to the dry box needs to be glued to prevent it from falling off (due to error, installation may require simple repair),

3: To change the material, you need to unscrew the shaft body, otherwise it cannot be directly placed on the ams.