Search models, users, collections, and posts
Pokemon Umbreon (HueForge)
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
4.4 h
1 plate
Open in Bambu Studio
Boost
70
153
18
7
112
82
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x123.29mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 3,5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #22 (1.84mm) swap to Ivory White for the rest.
Remember if you sant to scale, do it only with x and y axis, z must be the same as original.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (18)