Search models, users, collections, and posts
Astronaut Hueforge
Print Profile(2)
0.08mm layer, 1 wall, 100% infill
Designer
3 h
1 plate
0.08mm layer, 1 walls, 100% infill
3.2 h
1 plate
Open in Bambu Studio
Boost
33
78
6
3
43
26
Released
Description
AMS is not needed.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
PLA Black (Transmission Distance: 0.6)
PLA Dark Gray (Transmission Distance: 1.8)
PLA Light Gray (Transmission Distance: 0.5)
PLA Light Brown (Transmission Distance: 2)
PLA White (Transmission Distance: 3.5)
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Dark Gray
At layer #15 (1.28mm) swap to Light Gray
At layer #18 (1.52mm) swap to Light Brown
At layer #21 (1.76mm) swap to White for the rest.
If you don´t have light brown you can use light gray instead.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (6)