Kila_1514371965

cover

Hoekklem_9891e87c-f341-446c-90d4-bfe7364b4532.jpg

Schermafbeelding 2024-04-19 233145_a755ccda-2b9c-4861-95b4-48b94a1bcd3f.png

plate_1.png

Hoekklem_9891e87c-f341-446c-90d4-bfe7364b4532.webp

0.2 layer height25% cubic infillsize 105mmx105mmx20mm

0.2mm layer, 2 walls, 25% infill

franklindroosevelt

Untitled.png

Double your pleasure with this print, since there are two clamps included on one build plate. Printed in PLA, 4 top and bottom layers in addition to 5 wall layers.

0.2mm layer, 5 walls, 15% infill

Bemme7

20240910_151859.jpg

20240910_151752.jpg

20240910_152017.jpg

20240910_151959.jpg

<ul><li>.16mm Optimal @BBL X1C</li><li>2 wall loops</li><li>25% infill</li><li>Cubic infill pattern</li><li>.2mm layer height</li><li>No support was needed</li><li>printed in Bambu PLA Basic - White</li></ul>&nbsp;

EvoMaker

20250129_104535.jpg

20250129_104459.jpg

As I was short on clamps and my clamps are too wide, I made this little adapter so I could use 1 clamp per corner.Compatible with 35mm max clamp width.

Adapter to use 1 clamp  per corner

Just a simple 90 degree clampable cornerbracket for woodworking or other usages.25% cubic infill is strong enough&nbsp;Size in mm 105x105x20

Sturdy 90 degree corner profile (clampable)

ASIA

Print Profile(4)

Description

Comment & Rating (346)

License

Related Models