Universal Plate Holder for 3D printer

3D model description

Plate holder for 3D printers! The plates can be of any size, the only important thing is that they must be thin square plates.

It can contain a maximum of 3 plates, they must be inserted obliquely; it's the only way to insert them

3D printing settings

Retraction: [On]
Infill: [20%]
First/Top: [2/3 layers]
Walls: [2/3]
Thickness of the nozzle: [0.4 mm]
Layer height: [0.2 mm]

It does not require supports, the hexagons will be created using the bridge function (basic setting of Cura Slicer).