Airbus A350 Model

A detailed Airbus A350 model. It is likely the most detailed A350 model for 3D printing online. No AMS needed. Glue needed. Super glue works fine if printed in PLA. It resembles the real A350 as much as possible in terms of aerodynamics, while some modifications have been adopted for easier 3D printing and better visual effects. The assembly instruction is located at the end of the page. I also made an A380 if you are interested. To make the curved winglets, soak the tips of the wings in hot water to soften them and bend them upward very gently. The wing tips are very fragile.

Two print profiles are available. They have been tested on A1 mini and P1S, and they both take about 10 hours:

1. Small Version with 0.2 Nozzle: Length: 17.5 cm (~7 in) Space and filament savings.
2. Large Version with 0.4 Nozzle: Length: 35 cm (~14 in, because of A"350") Simply awesome if space and filament are not a concern.

Disclaimer: Airbus and China Eastern Airlines did not sponsor this project. If you own these companies, please consider hiring me.

Assembly Video (EN)

Assembly Video (CN)

Stand

Engine (Repeat for the Right Side)

Wing (Repeat for the Right Side)

Cockpit and Fuselage (Don't forget to assemble the APU at the tail. APU exhaust up)

Apply Livery (China Eastern Livery is available in PDF. It is the simplest livery I could find.)

If printed on regular A4/Letter paper, please use white (school) glue to apply the decals.

Done!