Search models, users, collections, and posts
Print Profile(1)
0.08mm layer, 2 walls, 15% infill
Designer
4.6 h
1 plate
Open in Bambu Studio
Boost
57
113
20
8
91
64
Released
Description
Thanks for visiting!
Trying different variations of flags and I thought this one really popped out at me. Hope you enjoy.
They come out fairly thick so it has a nice feel to it.
If you resize the model make sure you do NOT scale the Z axis or the print colours will not be in the same position
Print at 15% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA HueForge Navy Blue 1.3 Transmission Distance: 8
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Navy Blue 1.3
At layer #10 (0.88mm) swap to Dark Red
At layer #15 (1.28mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (20)