草台班子

cover

IMG_6527_155f9277-efd6-4148-bba4-8ef21bfce571.jpg

p1s screen dust cover_ea335023-4867-4155-9f58-b06e5d549e2f.png

IMG_6525_51406123-c701-4574-a1de-336784e40f3f.jpg

IMG_6526_e8681a95-366d-4adc-b550-9b87bac307d8.jpg

plate_1.png

IMG_6528_cb24aa84-7605-4e33-84d6-e1114c692747.webp

p1s screen dust cover_ea335023-4867-4155-9f58-b06e5d549e2f.webp

plate_1.webp

No support needed, built-in support bundled!0.16mm preferred due to the small hole.

P series - 0.16mm layer, 2 walls, 15% infill

IMG_6528_0a2a5f41-d8c2-435c-ada6-a370ffaf2b80.webp

IMG_6527_959ca82b-574b-46aa-822d-2410f446efe5.webp

IMG_6525_7c4f4ccb-7791-4858-b40f-113bfb9af64e.webp

IMG_6526_cd5fbba9-134d-47d5-9541-be66faae53db.webp

A series - 0.16mm layer, 2 walls, 15% infill

plate_2.png

創客姊妹

plate_2.webp

IMG_2333_4414c38a-e913-4d10-bb79-d67367b3532f.webp

IMG_2332_cedb5bd3-1efa-4aeb-bf61-8c635d0072a1.webp

IMG_2331_c0715d70-5a01-47ea-93a4-fb14655a4429.webp

petg printed pin, 1.5mm x 20mmVery easy to assemble and not easy to break.Please set the material configuration according to your own material properties

0.16mm layer, 5 walls, 15% infill

JohnWick365

IMG_9949.png

IMG_9948.png

Includes ball joints that fit into the hinges so that you don&#39;t have to print anything additional just push in and done.&nbsp;Cover sits a little low, but it works! Don&#39;t forget to remove the cover mount inside bracket first which is same as original model. &nbsp;Printed/tested in PETG

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please boost me if the screen cover fits for your printers. Thank you so much!</boostcontent></boostme>!!! Strongly recommend !!!!!! Anyone who cares for printers strongly recommends you to print this cover to protect your screen from dust and scratches !!!&nbsp;Material: 2 cylindrical pins with dimensions of M1.5x20mm.Print filament: PETG with well-tuned parameters.&nbsp;No support needed, built-in support bundled! Please be careful when removing the built-in support.&nbsp;If your filament isn&#39;t calibrated, please make sure your flow ratio is equal or less than 0.96.Overextruded may result in difficulty inserting the cylindrical pins.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000441468/design/2024-04-29_761af0f42707a.png"></figure>&nbsp;

P1P/P1S screen cover

ASIA

Print Profile(4)

Description

Comment & Rating (911)

License

Related Models