Chris3DPrints

cover

IMG_4744_6baaf7c5-c27c-4fc9-9815-fa71180b49a1.jpeg

IMG_4745_6c462221-8bcf-4887-a466-c6f33347032c.jpeg

IMG_4746_c621b105-e19f-44f1-b59c-858c4625ea3f.jpeg

IMG_4747_91b6d0c9-21f5-436a-8ba5-8c0b42c5f177.jpeg

plate_1.png

IMG_4743_ae9a5ae9-07b4-4631-99b2-39459e518960.webp

0.2mm layer, 2 walls, 10% infill

OldSalty3D

IMG_1333.JPEG

For some reason the original placing of the connector section prevented my from placing my Bambu Scraper in the slot properly.  There wasn&#39;t enough space behind the holder to allow for the thumb brace.  I used Bambu Slicer to cut the connector of fand moved it to the other side.  This will place the scraper in such a way you won&#39;t be able to see the lettering on the scraper when it&#39;s in the holder, but if you find that your scrapers isn&#39;t fitting well into the holder you may want to try this one.

Placed connector section on the opposite side.

Trusted Developments

2024-04-25_23-09-27_08b6757e-45fa-466a-b79c-578a5831582c.webp

IMG_7038_3d498775-e316-497a-8d86-645ce6a6e7fe.webp

IMG_7036_6f02fc31-b6c7-44bc-997c-2aa8b4b6cbbf.webp

IMG_7037_aa141e1f-d231-4772-8e39-8f9f04803e99.webp

plate_1.webp

IMG_7040_7e46f46d-8aef-4dc9-9d39-4368ad732da8.webp

Since the snap will be hidden from view, only the mechanical properties need to be taken into account, thus I manually painted support regions before printing.

Less Supports, 0.2mm layer, 2 walls, 10% infill

IMG_7033_7e47e073-ac74-41c8-a33f-0b3ca961ea2d.webp

IMG_7035_1cbe9013-682a-4dc0-8dfa-5cba2936b345.webp

IMG_7034_696b45ee-36b2-4ad1-af2d-5657b1c682e3.webp

Prints with less support on the snap, still fully functional.

This is a Bambu Scraper Holder for the Multiboard. Simple way to store your scraper on the multiboard next to your other printing tools.

Bambu Scraper Holder for Multiboard

ASIA

Print Profile(4)

Description

Comment & Rating (27)

License

Related Models