YEHW - Newly Created Cannon - Second Optimization

Second Optimized Version of the Newly Created Cannon, Thanks to the Original Author. This Modification is Based on the Above Two Versions, Correcting and Filling Some Pitfalls in the Production Process. There Are Some Remaining Hardware Kits. They Are Related to This Account Name. Please Search at Your Leisure.

Laogong Optimization Content:

1. Modify the trigger tension device from a rubber band to a spring; 2. Cancel the piston gasket and change it to a one-piece print. The piston gasket is too difficult to obtain; 3. Modify all screw hole positions to M3*12;

This Optimization Content:

1. Increase the height of the rear bottom of the cylinder by 2mm to eliminate the problem of insufficient 100mm cylinder length

2. Correct the problem of excessive gaps in the handle screw holes in Laogong's version

3. Do not use M3X12 for the screw connecting the guard and the handle. It will result in an inability to tighten to the bottom or tear the printed part. Please use M3X10

4. The components have been arranged and color-coded. The load-bearing structures have been printed separately with customized printing parameters.