Search models, users, collections, and posts
Adapter for 2,5 kg spools
Remixed by
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
5.1 h
3 plates
Open in Bambu Studio
Boost
17
30
8
1
63
23
Released
Description
Adapter for the awesome
Bambu Lab P1 / X1 / X1C / X1CC Filament Spool Switcher & Winder if you use AMS
from Miklos Kiszely.
Which allows to use it with 2,5 kg spools with a height of 100 mm and a diameter 53 mm.
Filament: extrudr greentec pro (PETG, PLA etc. will work)
Print settings for the "Aufsatz_2.5kg_spule":
- orientation: see picture
- layer height: 0.2
- wall loops: 3
- Top/bottom layers: 5
- infill: 15% gyroid
- support: tree(manual)[ just support the very top of the diameter]
Print settings for the "Adapter_2.5kg_spule":
- orientation: see picture
- layer height: 0.2
- wall loops: 3
- Top/bottom layers: 5
- infill: 15% grid
- support: no
________________________________________________________________________________________________________________
Update:
Version 2 which should be more firm.
Print settings for the "Aufsatz_2.5kg_spule_V2":
- orientation: see picture
- layer height: 0.2
- wall generator: arachne
- wall loops: 3
- Top/bottom layers: 5
- infill: 15% gyroid
- support: tree(manual)[ just support the very top of the diameter]
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (8)