ViceroySyrup

cover

Bodies AMS

plate_1.png

Arms, Legs, Stems, Eyes, and Cheeks AMS

plate_2.png

masterpigg

PXL_20260102_053411722_resized.jpg

The existing project did not have any public print profiles, so I made one.  This profile simply arranges everything across two plates for printing with an AMS.  I added a set of cheeks in two different colors to account for possible print errors given their small size and to allow for more variety.  Unfortunately, I forgot to get a picture before giving them to my kids, so many of them had lost their leaves by the time I remembered.  The leaves were intact when I assembled them. :)&nbsp;For adding the magnets, I did not pause the print as suggested.  I found it was easy enough to carefully press them in with a mallet before supergluing any of the smaller features.  I did add superglue inside but it was likely unnecessary as those magnets were very snug and are not going anywhere!

0.2mm layer, 2 walls, 15% infill AMS

Junimo Magnet Model, made to fit magnets that are 10.4 x 9.1 x 2.8 cm The ones I used when making these can be found <a href="https://amzn.to/3qgooQB" rel="nofollow">here</a>. An the glue I used to adhere everything together is <a href="https://amzn.to/3QkbPhM" rel="nofollow">Gel Gorilla Glue</a>, which can be found easily at your local home depot, rona, or hardware store. You can print the Junimo as one solid entity, or separate parts to have each piece come out as a specified colour. Then use some super glue to adhere all the pieces together. It is recommended to stop the print to place the magnet inside so the layer prints over top and binds the magnet to the Junimo.

Junimo Magnet

harebonse

WhatsApp Image 2025-01-18 at 00.27.24.jpeg

Junimo Magnet + Keychain

ASIA

Print Profile(1)

Description

Comment & Rating (21)

License

Remixes (1)

Related Models