FiBo - Filament Box

→ Profile is currently being reworked - Model files are up2date and can be used as is ←
→ Additional profiles will be made available as well as new parts ←

FiBo - The Filament Box!

Designed to carry filament spools with 20cm maximum diamenter. 

FiBo BigBox version available: FiBo BigBox Filament Box by Piddey - MakerWorld

Features:

• 6 ball bearings to hold the spools (4 in Base, 2 in Lid to prevent spool movement)
• a groove to insert a 1mm thick rubber thread/cord to seal the box
• PTFE coupler in the front for filament guidance
• a slot on the front face to insert a small filament sample (FiBo Sample Card)
• fits perfectly on the FiBo Pipe Shelf!
• the base can be filled with silicagel to keep the filament dry
• Filament Plug (now in two versions)
• Rubber Cord Spool (to store your loose rubber cord)
• FiBo - Assembly Station (stores parts to build 6 FiBos)
• Available for different spool sizes and in different lengths
• Dessicant Tray

FiBo - Pipe Shelf Mount:

Wall mount for 25mm (3/4") pipes to store your FiBo boxes.

Required parts for one box:

• FiBo - Base (choose your size)
• FiBo - Lid (choose your size)
• FiBo - Clips (2x)
• FiBo - Filament Plug
• 6x Ball Bearings (inner diameter 8mm, outer diameter 22mm)
  (https://www.amazon.de/gp/product/B00EPNN62M)
• 4x M6x25 Screw + Stop Nuts
• ca. 60cm NBR rubber cord with 1mm diameter
  (https://www.top-industrieteile.de/gummirundschnur-nbr-1-mm-meterware.html)
• 1 M10 PTFE coupler
  (https://www.amazon.de/gp/product/B07SKX5P9P)
• ca. 8cm of PTFE tube
  (https://www.amazon.de/gp/product/B072KJ2VXH)

(the links contain the materials I use. buy wherever you want)

Required parts for the pipe shelf:

• FiBo - Pipel Shelf Mounts (as many as you need)
• 4x 6mm screws for each mount (and matching dowels, if required)
• 2x 25mm (3/4") aluminum pipe

... the rubber cord spool is also available here without FiBo branding: Small Spool for 1mm Rubber Cord by Piddey - MakerWorld

Additional sizes available:

In the “Downlaod STL” section, there are boxes available for multiple sizes. The size informatio in mm represents the spool thickness.

Let me know if you have any issues.

Notes: 

Supports are required for:

• the *Ball Bearing Pins" in base and lid
• the pipe shelf, if printed lying (what is suggested for strength)
• Depending on your printer's 'bridging skills' you should also add some supports to the Filament sample slot on front of the lid.

The Pipe Shelf Mounts should be printed stronger!

I used the following settings:

• Layer: 0,2mm
• Perimeters: 3
• Top/Bottom Layers: 6
• Infill: 50%
• Filament: PETG/PLA

Rubber Cord Spool and Assembly Station do not require any supports.

Print Time Lapses

Timelapse print on Dremel DigiLab 3D45

Timelapse print on Dremel DigiLab 3D45