Although I liked the transparency and box printing of the original insert, the fact that it didn't fit sleeved cards was an issue for me. This Imperium Legends/Classics organizer includes replacement card holders and token storage that's a modified version of my bit drawers that will fit vertically in the box.

You will need to print 2 drawers, 2 card holders, and one lid. Please keep reading for the difference between the files and the print settings.

Card holder:

Imp_leg_cards - this is the basic one, has equally spaced slots that let you still see the original names printed inside the box.

Imp_leg_cards_nodiv - This version doesn't have any dividers, so if you want to combine the sets you can do so with your own dividers.

Token Drawers:

imp_leg_tok - This is the one shown in the photo. The drawers have a notch in them to let you store the strips inside.

Imp_leg_tok_nonotch - This one doesn't have the notch for the strips, if you want to lay them on top or something.

Imp_leg_lid - You will need to print one of these for the top.

Print Settings:

Wall thickness 1.2mm to prevent a bunch of little zigzags
Top layer and bottom layer 0 to save time and you get that mesh look to the horizontals