Search models, users, collections, and posts
Game Bit Tray with Lid
IP Report
Print Profile(3)
0.2mm layer, 3 walls, 30% infill
Designer
49 min
1 plate
0.2mm layer, 2 walls, 45% infill (Stronger lid & base)
53 min
1 plate
0.6mm nozzle, 0.3mm layer, 2 walls, 45% infill
2.7 h
1 plate
Open in Bambu Studio
Boost
192
778
72
41
525
366
Released
Description
Summary
This is a board game bit/component tray that's the same dimensions as my other game bit tray but also includes a snug fitting lid so you can just include it in the box. There is one lid, but two versions of the base box. The full version looks like the photos and the lid fits snugly on the underside of the base when open. The alternate "lite" version of the base is tapered on the outside to minimize filament use and time (about 50% savings to both) but no you can no longer attach the lid to the bottom.
To optimize print time and filament use, print with top layer and bottom layer set to 0, wall thickness 1.2mm. Zigzag infill at 20%.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (72)