Search models, users, collections, and posts
HSW Ratchet Mounts for 1/2, 3/8 and 1/4 Inch drive
IP Report
Print Profile(1)
0.2mm layer, 4 walls, 20% infill
Designer
52 min
3 plates
Open in Bambu Studio
Boost
78
209
18
3
236
139
Released
Description
HSW Ratchet Mounts for 1/2, 3/8 and 1/4 Inch drive
This design comes with three models designed to fit a 1/2, 3/8 and1/4 Ratchet. The mounts fit directly into the HSW system without any adapters. Each mount has notch so the racchet will lock in place and stay secure. To release the ratchet press the button on the end of the ratchet, the same as releasing a socket.
Print Settings:
These mounts can be printed in either PLA or PETG. No supports are needed.
- Material: PLA/PETG
- Layer height: 0.2mm
- Perimeters/Wall Loops: 4
- Sparse Infill Density: 20%
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (18)