Adafruit M4 CAN Feather & Oled Featherwing Casing
Print Profile(1)
Description
Here is my case design for the Adafruit M4 CAN Express & 128x64 Oled Featherwing combo.
I'm sure this may also fit with other feather boards as they are the same footprint.
There are some hardware required to complete this casing but they are just the following:
- 4x M2.5x3mm Heat inserts
- 4x M2.5x20mm Bolts
The assembly of the boards can be a little fiddly due to it's size but lowering the feather in first and then securing your CANBus wires in the screw terminals before adding the Oled Featherwing and lid then finally the 4 screws to hold everything together.
This was created of the need to carry around the boards while developing a project which is still ongoing but I found it a useful enough design for my purposes.
Enjoy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (8)