Fingerboard Park! (Ramp, Stairs, Rail, and Corner)
Print Profile(2)
Description
A fully 3D printed skatepark for a fingerboard! I recommend using tape or putty to hold down the pieces. Print as many as you need! Please refer to the photo on ideal printing orientation. Also note the placement of supports underneath the outside edges of the rail. If your printer struggles with overhangs or you want a better overhang, also consider supporting the middle of the rail.
Update 11/25/24: Added “Thin” version of the quarterpipe that makes it only one layer thick on the bottom. This makes it easier to get a board onto the ramp. It can be printed from the “Individual Ramps” profile. Thanks for @HardwareMaster for the suggestion!
Boost Me (for free)
Please leave a boost and review if you enjoyed!
This model was designed by Zammer 3D and posted here on MakerWorld.com under the Standard Digital File License. Feel free to print for yourself, but do not sell this model. Thank you for respecting the license and supporting me!
Commercial License and TipsPlease check out my Buy My a Coffee page to leave a tip, become a member, or purchase a commercial license. |
Happy printing!
-Z
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (80)