Search models, users, collections, and posts
Raspberry Pi 5 - M.2 HAT+ case
IP Report
Print Profile(4)
Rev.3 - 0.2mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
Rev.2 - 0.2mm layer, 2 walls, 15% infill
Designer
1.8 h
1 plate
Case Accessories - Power Button
Designer
11 min
1 plate
A1 mini - Rev.2 - 0.2mm layer, 2 walls, 15% infill
1.8 h
1 plate
Open in Bambu Studio
Boost
189
558
139
65
1.6 k
937
Released
Description
Raspberry Pi 5 case for m.2 Hat+
Secures in the case using m2.5 x 10mm screws on the bottom
Designed to provide room for the pcie ribbon cable.
*Rev.2 - increased the dimensions to allow more clearance and fitment of the m.2 thumb screw.
**Updated the print profile and STL/STEP to include Rev.2 files.
*Rev.3 - Used integrated Bambu Studio mouse ears for corner bed adhesion. *I find it works really well to keep the edges from peeling/warping
** added side air-flow vents
*** added removable SDCard slot - you can remove after printing or remove before printing and replace with supports.
**** fixed snap together joinery for better hold/fitment
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (139)