Reolink E1 Wall / Shelf Mount (E1Pro / E1 Zoom)

Wall Mount / Shelf Mount for Reolink E1, E1 Pro & E1 Zoom

"Secure. Fits. Films. – More View, Less Cable Clutter."

Sometimes you don't need a high-tech mount from a space program – just something that is **securely seated**, **flexibly mountable**, and **doesn't let the cable dangle like spaghetti**. That's exactly what this holder is designed for

Originally developed for a **rabbit hutch with free run** (Priorities!), it's now also used by users for **printer monitoring** and other setups 😁

Features

• Compatible with **Reolink E1 / E1 Pro / E1 Zoom**
• **Horizontal or vertical mounting** possible (depending on the installation location)
• **2 mounting positions** for the original Reolink adapter plate (depending on orientation)
• **Cable clip** on the back: Power cable stays where it should
• Solid, simple, practical – no frills, just functionality

Hardware

• Holder Fastening: **Standard screws up to Ø 4 mm**
• Camera/Adapter Plate: **M3x8 to M3x12 countersunk screws**
  (depending on material/screw head, check briefly beforehand to ensure nothing interferes internally)
   

No adapter plate anymore?
User Jogi164 has created a suitable adapter plate – thanks for that! 🙌

Perfect for moments like…

• …you want to see who's "redecorating" in the rabbit hutch again 🐰
• …you want to keep an eye on the printer without running into the room every 3 minutes
• …you need a camera on a shelf, but want to keep drilling to a minimum
• …you want to place the E1 effectively without the cable playing the main role

A Little Note

The model is a **3D-Print-Mount** (not an official Reolink accessory). Please briefly test if everything is securely seated when used in sensitive locations – before the camera involuntarily turns into an 'action cam' 😁

**Happy Printing!**
If this part helps you, a **Like / Comment / Make** would make me incredibly happy – it also helps others with their evaluation 😉

Reolink Mount for IKEA SKADIS

If you are looking for a Reolink mount for an IKEA SKADIS wall, I have published a versatile mount - IKEA SKADIS - Reolink E1 Series - FlexMount

Print Recommendation

• **0.2 mm** Layer Height
• **4 walls** (maximum stability)
• **Seam Position:** Rear
• **Wall Generator:** Arachne
• **15% Infill:** Gyroid
• **Support:** minimal (manual) **only below the mount**, **only on build plate**
• **Material:** **PLA for indoor** (completely sufficient), **PETG or better recommended for outdoor** (more robust/temperature resistant than PLA)