Print Profile(6)
Description
If you want to sell prints of this model, as well as all of my models - future and past
Subscribe to My Patreon:
Or Subscribe for a commercial License Directly in Maker World:
Membership
C3D Commercial Membership - Authorized Merchant
A beautiful set of bookmars with a different pictures of a Sakura Tree
The full set is to be printer together. It's designed in such a way which makes this possible with color changes by layer.
For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle)
The design allows for printing with simple color changes at layer, which saves a lot of filament!
USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
For folks without AMS:
Filaments Used:
PLA Kingroon Black Transmission Distance: 0.4
PLA KINGROON Red Transmission Distance: 4
PLA KINGROON PINK Transmission Distance: 6.5
PLA Jayo Matte White Transmission Distance: 3.5
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to PINK
At layer #14 (1.2mm) swap to White for the rest.
Boost Me (for free)
If you enjoy my work and want to support me boost this model in show of support! Every single boost puts a smile on my face and is greatly appreciated! 🤜🤛
If you like my work, drop me a follow!🤜🤛
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (205)