Microtech Jagdkommando Knife Toy, Model with Sheath

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Due to the new regulations, I cannot provide the complete model here. I will share the complete model on a cloud drive. After downloading the .3mf file here, you will receive the password, and you will have the complete toy.

Please do not open the downloaded .ZIP file directly with Windows Explorer, as it cannot be opened with a password. Please use unzip software such as 7-zip to open it.

Due to some comments in the comments section, I will no longer reply to any comments from now on!If you can understand the introduction, you will be able to obtain the complete model. If you cannot obtain the model, I will not provide any further explanation.

The machining behind the Microtech Jagdkommando™ (German for mountain hunter) is highly impressive. Starting at the hollowed handle and watertight top, the machined grenade pattern of the handle transitions seamlessly into the three-edged blade, finally twisting to a deadly point.I really like this unique-looking knife, so I made a model and shrunk it down so it can fit in my hands better.

To increase the adhesion between each layer of 3D printing, please reduce the printing speed and layer height. You can also increase the size to increase the structural strength.

Microtech Jagdkommando™（德语意为山地猎人）的加工工艺令人印象深刻。从中空的手柄和防水的顶部开始，手柄上的机械手榴弹图案无缝过渡到三刃刀片，最终扭曲到致命的尖端。我非常喜欢这款造型独特的刀，于是我制作了这模型，进行了缩小，更好可以在手中把玩。

为了增加3d打印的层间黏合力，请降低打印速度和层高。你也可以增加尺寸来增加结构强度。

Please be safe when using./使用时请注意安全。

PS：2024/6/15  Strider&Microtech Stub knife toy挺进者微技术联名款折刀玩具

https://makerworld.com/zh/models/496550#profileId-410860

2024/6/17 M48 Cyclone Push Dagger Toy Knife  带鞘玩具刀

https://makerworld.com/zh/models/499176#profileId-413830

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.