Search models, users, collections, and posts
Godzilla - HueForge
IP Report
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
1.6 h
1 plate
Open in Bambu Studio
Boost
71
154
15
10
124
69
Released
Description
Project: 150.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 150x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Red Transmission Distance: 4
PLA White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #12 (1.04mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (15)